EN 50525-2-31, IEC 60227-3
(Construction and tests)
Low voltage Directive: 2014/35/UE
CPR Regulation (EU) No 305/2011:
Reaction to fire (Eca)
Technical characteristics & performances
- Bunched conductor (class 5) mm2
- Maximum service temperature: 70ºC / 160ºC
- 450 / 750 V C.A.
- Easier pulling
- Easy peeling / easy strip
- Eca (reaction to fire)
- Flame retardant
Uses and applications
- Panel and appliance wiring
- Residential use
- Industral use
- Earthing & grounding
- Indoor use
EN 50525-2-31, IEC 60227-3 (Construction and tests)
Single core non-sheathed cables with thermoplastic PVC insulation
Flexible, annealed, plain copper conductor, class 5 based on standard IEC 60228, EN 60228.
Polyvinyl chloride insulation (PVC) type TI 1 acc. to EN 50363-3.
Number of cores: 1
Cross-sectional area size range:
- H05V-K : 0,5 / 0,75 /1 mm2
- H07V-K : 1,5 to 240 mm2
300/500 V | 450/750 V
Normal operation temperature:
Short-circuit temperature (5 s max):
2 kV A.C H05V-K
2,5 kV A.C H07V-K
*INSULATION: black, brown, gray, blue, yellow-green, red, white. Other colours on request.
- Reaction to fire: Eca (EN 50575:2014+A1:2016)
Flame retardant: EN 60332-1-2; IEC 60332-1 (H≤425 mm)
For covered range (+ information), please check out "CPR/DoP" section in our website.
*The packaging labels of these cables include the CE marking according to the CPR Regulation ((EU) Nº 305/2011) articles 8 and 9.
Type of installation:
H07V-K: Installation in surface-mounted or embedded conduits, or similar closed systems.
They are recommended for fixed and protected installation in lighting and control gear for voltages upo to and including 1.000 V A.C or up to 750 V D.C. to earth.
H05V-K: The cables are suitable for installation in surface-mounted or embedded conduits when used for signalling or control circuits.
They are suitable for internal wiring in electrical boards and fixed installations with complex paths where its flexibility allows an easier installation.