Solflex H1Z2Z2-K

Functional features

• Technical designation:
  H1Z2Z2-K
  62930 IEC 131 HALOGEN FREE LOW SMOKE
• Constructive description:
  IEC 62930 & EN 50618 (Construction and tests)
  
  - CONDUCTOR:
  Flexible, annealed, tinned copper conductor, class 5 based on International standard IEC 60228. Suitable for mobile service.
  - INSULATION:
  Crosslinked polyolefin, halogen free, according to Harmonised Standard EN 50618.
  - OUTER SHEATH:
  Crosslinked polyolefin, halogen free, according to Harmonised Standard EN 50618.
  
  Single-core cable, double jacketed. They are suitable for fixed and mobile installation.
  
  Maximum permitted operating D.C voltage: 1,8 kV. 
  Rated A.C. voltage (Uo/U (Um)): 0,6/1 (1,2) kV
• Rated voltage:
  0.6/1 kV
• Normal operation temperature:
  90ºC (120ºC (20.000h))
• Short-circuit temperature (5 s max):
  250ºC
• Voltage test:
  6,5 kV A.C (5 minutes) or 15 kV D.C (5 minutes).
• Colour:
  OVERSHEATH: Black or red (other colors under request)
• Fire performance:
  Reaction to fire (CPR Regulation): Eca
        Flame retardant: EN 60332-1-2; IEC 60332-1 (H≤425 mm)
        DoP: MEH1Z2Z2K
  For covered range (+ information), please check out "CPR/DoP" section in our website.
  ^{*The packaging labels of 1x2,5 upt to 1x35 mm2 include the CE marking according to the CPR Regulation ((EU) Nº 305/2011) articles 8 and 9.}
  
  Other performances:
  - Low opacity of emitted smokes: UNE EN 61034-2; IEC 61034-2
           60% < Light transmittance
           In case of fire, it avoids loss of visibility due to smoke produced by cable combustion
  - Low acidity and conductivity of the emitted gases: EN 60754-2; IEC 60754-2
           pH≥4,3 conductivity < 10 microsiemens/mm 
  - Halogen free. Low emission of toxic gases: EN 60754-1, IEC 60754-1 (HCl <0,5 %)
• Type of installation:
  Mobile
• User´s guide:
  SOLFLEX H1Z2Z2-K is intended for fixed or mobile(heavy duty) photovoltaic (PV) installations in ground, rooftop systems or other architectural integrations. They are suitable for indoor or outdoor installations.
  Ideal for solar trackers which require flexibility and aptitude for mobile service.
  It is recommended for panel interconnection in PV installations or from the string boxes to the inverter.
  
  Installation methods*:
     • Surface mounted inside conduits or protective channels or directly installed on clamps, ladders or cable trays.
     • It can be used in rooftop installations or in other types of architectural integrations.
     • It can be installed as internal wiring of electrical panels or equipments.
     • Buried in conduit in the ground.
  In the case of placing the cable on clamps, the horizontal distance between the clamps will not be more than 20 times the diameter of the cable. The distance is also valid between support points in case of laying on cable racks or on trays. In no case should this distance exceed 80 cm.
  
  – Weather and UV resistant according to annex E of standard IEC 62930 and EN 50618.
  – Permanent outdoor use, condition AN3.
  – Suitable for the presence of vibrations, condition AH3.
  – Impact resistance, condition AG2.
  – Resistance to corrosive or polluting substances, condition AF3.
  – Presence of water, condition AD7 & AD8**.
  – Resistance to extreme temperatures (-40 to +90 ºC).
  – Ozone resistance.
  – Thermal endurance test according to standards IEC 60216-1 / EN 60216-1 and IEC 60216-2 / EN 60216-2.
  – Resistance of the roof to acid (N-Oxalic acid) and alkaline (N-Sodium Hydroxide) solutions according to standards IEC 60811-404 / EN 60811-404.
  
  
  * (The installation systems and additional requirements established by any applicable regulation, law and/or standard must be met).
  
  ** Protection against water:
       - AD7 (certified according to EN 50618 and IEC 62930).
       - AD8 according to Annexes D and E of standard EN 50525-2-21 (self-declaration).
         MIGUÉLEZ conducts studies and assessments of the water resistance of the SOLFLEX H1Z2Z2-K cable by applying the available tests that grant this classification to other products. In this regard, the photovoltaic cable SOLFLEX H1Z2Z2-K successfully passes the tests specified in Annexes D and E of EN 50525-2-21.
         These tests are applicable to cables considered suitable for installation under AD8 submersion conditions in the installation scenarios permitted and foreseen for such products in accordance with EN 50565-2.
  
  
  - Suitable for the application in/at equipment with protective insulation (protection class II).
  - They are inherently short-circuit and earth fault proof acc. to HD 60364-5-52.
  - Intended for use in PV installations acc. to HD 60364-7-712.
  - Easy to handle and install, easy stripability.
  - Suitable to common connector types.
  
  Temperature ranges:
      • Minimum ambient temperature: - 40º C
      • Maximum ambient temperature: + 90º C
  
  Minimum temperature for laying and installation: - 25º C
• Conductor:
  Flexible
• Halogen free:
  Yes
• Armoured cable:
  No